Menu Description - SATO GL4xxe Series Operator's Manual

MENU
Ret. Status Port
Disable
ADVANCED MODE
Del Char frm F1s
Ld Char from F1s
Save Char from F1s
Del Char frm RAM
Ld Char at PwrUp
Del Set frm F1s
Ld Set from F1s
Save Set to F1s
Del Set from RAM
Ld Set at PwrUp
Main FFS
Optimize&Reboot
MAIN FFS
Overwrite Files
View Main Files
Delete Files
Flash Avail.
View Main Files
XXXXX.XX
XXXXX.XX
XXXXXX Bytes
GL408-412e Operator's Manual
Unit 4: Printer Configuration
ADVANCED MODE (TABLE 4-3)
This option selects the port for the Return Status Commands (i.e., ~STATUS (PGL) and ~HS
(PPI/ZGL)) to send the status back to the host.
The options are Serial, E-NET Stat Port, USB, IEEE 1284, Disable, E-NET Data Port.
Serial is the factory default.
Each option when selected, permits the deletion, loading, or saving of characters or overlay sets
to/from flash memory or Ram.
• Del Char frm F1s - deletes downloaded character(s) from flash memory.
• Ld Char from F1s - loads downloaded character(s) from flash memory.
• Save Char from F1s - saves downloaded character(s) to flash memory.
• Del Char frm RAM - deletes downloaded character(s) from RAM.
• Ld Char at PwrUp - loads downloaded character(s) from flash memory at power up. Can
enable or disable. Disable is the factory default.
• Del Set frm F1s - deletes downloaded overlay set(s) from flash memory.
• Ld Set from F1s - loads downloaded overlay set(s) from flash memory.
• Save Set to F1s - saves downloaded overlay set(s) to flash memory.
• Del Set from RAM - seletes downloaded overlay set(s) from RAM.
• Ld Set at PwrUp - loads downloaded overlay set(s) from flash memory at power up. Can
enable or disable. Disable is the factory default.
• Main FFS -
• Optimize&Reboot - reclaims flash space from deleted flash files. After pressing the ENTER
key on the printer's operator panel, wiat for the printer to reboot. Will optimize both the Main
and Extd file system if present.
Main Flash File System.
• Overwrite Files - factory default. This option prevents files in the main file system from being
overwritten by disabling the overwrite function.
• View Main Files - displays a list of files in the main file system. Pressing ENTER on the
printer's operator panel display file size.
• Delete Files - allows deletion of files in the main file list. Contact your adminstrator for
assistance.
• Flash Avail. - displays the amount of flash memory available to save or download files into
main flash.
Is the screen that appears if the View Main Files option is selected from the MAIN FFS menu
screen. Displays the list of files in the main file system.
Is the screen that appears if the Flash Avail. option is selected from the MAIN FFS menu screen.
Displays the amount of flash memory available to save or download files into flash.
DESCRIPTION
4-33