802.11G Wireless - SATO GL4xxe Series Operator's Manual

Connector
Cable
Cable Length
Power Supply
Protocol
IP Address
Subnet Mask
Gateway Address

802.11G WIRELESS

The wireless print server provides easy printer interface with 802.11g Wi-Fi compliant networks free of wired
connections. Each printer is shipped with an integrated driver and interface installed. The driver must be loaded
onto the host computer and configured to run one of the supported protocols.
Variable Data Rates
Frequency Band
Wired Equivalent Privacy
Sensitivity
Range
Protocols
Protocol
IP Address
Subnet Mask
Gateway Address
Communication Mode
SSID
Channels
Link LED (green)
Status LED (orange)
Wireless LED (green)
GL408-412e Operator's Manual
SPECIFICATIONS
RJ-45 Receptacle
10/100BaseT Category 5
100 meters or less
Powered from printer
Status3 return
Protocol for Driver (cyclic response mode)
Protocol for Driver (ENQ response mode)
Status5 return
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
SPECIFICATIONS
54, 11, 5.5, 2 and 1 Mbps
2.4 GHz ISM Band
128 bit, 64 bit (compatible with 40bit), none (WPA)
(typ, AAWGN, 8E-2 PER): -91dBm at 1Mbps, -88dBm at 2 Mdps, -87dBm at 5.5Mbps, -
84dBm at 11Mbps.
100m indoors, 300m outdoors (enviromentally dependent)
TCP/IP, IPX/SPX, Direct Mode IPX/IP, DLC/LLC, NetBEUI, NetBIOS/IP
Status3 return
Protocol for Driver (cyclic response mode)
Protocol for Driver (ENQ response mode)
Status5 return
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
Infrastructure
Optional alphanumeric character string (up to 32 characters)
01 to 11
LED INDICATOR STATUS
Network Port
Front Panel
Network Port
Front Panel
Front Panel
Unit 3: Installation
Off ---
Blinking Waiting for link
On Linked
Off ---
Blinking Receiving packet
On Infrastructure mode
3-12