Macintosh Configuration - LevelOne FBR-1700TX User Manual

7port broadband router for adsl/cable modem

Hide thumbs Also See for FBR-1700TX:

Table of Contents

Macintosh Configuration

The FBR-1700TX currently does not support printing from the Macintosh,

but you can access the Internet via the FBR-1700TX. The procedure is as

follows.

Open the TCP/IP Control Panel.

2. Select Ethernet from the Connect via pop-up menu.

3. Select Using DHCP Server from the Configure pop-up menu. The DHCP

Client ID field can be left blank.

Close the TCP/IP panel, saving your settings.

Note:

If using manually assigned IP addresses instead of DHCP, the only

change required is to set the Router Address field to the FBR-1700TX's

IP Address.

PC Configuration

Table of Contents

Do you have a question about the FBR-1700TX and is the answer not in the manual?