Check The Leds - LevelOne FBR-1700TX User Manual

7port broadband router for adsl/cable modem

Hide thumbs Also See for FBR-1700TX:

Table of Contents

LevelOne Broadband Router User Guide

4. Connect Printer Cable

Use a standard parallel printer cable to connect your printer to the Printer

port on the FBR-1700TX.

5. Power Up

Connect the supplied power adapter and power up.

Use only the power adapter provided. Using a different one may cause

hardware damage

6. Check the LEDs

When the FBR-1700TX is powered On, The Status LED should flash,

then turn off. If it stays on, there is a hardware error.

For more information, refer to LEDs in Chapter 1.

Table of Contents

Do you have a question about the FBR-1700TX and is the answer not in the manual?