Table of Contents
Advertisement
Reset Button
DIP switches
Printer Port
When pressed and released, the FBR-1700TX will
reboot (restart).
This button can also be used to clear ALL data
and restore ALL settings to the factory default
values.
To restore the factory default values:
•
Power Off
•
Hold the Reset Button down while you Power
On.
•
Continue holding the Reset Button until the
Status (Red) LED blinks TWICE.
•
Release the Reset Button.
The factory default configuration has now
been restored, and theFBR-1700TX is ready
for use.
Refer to the following table.
Standard parallel printer port. If you wish to share
a printer, connect it here.
Introduction
7
Advertisement
Table of Contents
Need help?
Do you have a question about the FBR-1700TX and is the answer not in the manual?
Questions and answers