Copyright Notice This document is copyrighted by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time. Specifications are thus subject to change without notice.
Page 4
FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment.
If any of these items are missing or damaged, contact your distributor or sales representative immediately. Additional Information and Assistance 1. Visit the Advantech web site at www.advantech.com where you can find the latest information about the product. 2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70dB(A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
- Wenn das Gerät deutliche Anzeichen eines Defektes aufweist. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70dB(A) oder weiger. DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. FPM-2150G User's Manual...
1.1 Introduction Advantech's FPM-2150G Series is a 15" color TFT LCD flat panel monitor built specifically for industrial applications. With the optional touchscreen, the FPM-2150G Series is an excellent and user-friendly system control interface. In addition to its usual application as an LCD panel monitor, the FPM-2150G comes standard with direct VGA control signal input making it compatible with Industrial PCs and Workstations.
1.5 Connectors The following connectors are situated on the buttom of the FPM-2150G Series: VGA Port (DB-15) This DB-15 connector can be connected to the system via the external 15-pin DB-15 connector locatd on the left side of the system unit. Keyboard &...
1.5.1 PS/2 connectors The FPM-2150G provides two PS/2 connectors in the buttom side. Please follow the steps to connect the keyboard /mouse cable. 1. Connect 1.8m keyboard/mouse cable to one of the PS/2 port. 2. Connect other side of Keyboard/mouse 1.8m cable to PC 3.
2.1 Mounting the Monitor The FPM-2150G Series can be placed as you require. The versatility of the FPM-2150G mounts enable it to be mounted on your desk or anywhere else. 2.1.1 Wall Mounting Please follow the steps to install FPM-2150G in the wall. 1.
2.1.2 Panel Mounting If you need to install the FPM-2150G series on a panel mount, please release the mounting brackets by detaching screws on rear side and fix them on up and bottom side by screws. Figure 2-2: Panel Mounting 2.1.3 Rack Mounting FPM-2150G series can be directly mounted in a standard 19"...
2.2 Desktop, Swing-ARM for FPM-2150G The FPM-2150G Series can be mounted in other ways. You can place the desktop stand for desktop use or attach it on a swing-arm bracket. 2.2.1 Desktop Stand The desktop stand bracket is attached to the rear of the FPM-2150G. Simply detach the small bracket at the rear side of the monitor by screwing the two screws.
2.2.2 Swing-ARM Detach the mounting brackets on the rear side, then attach the FPM-2150G series onto the Swing-ARM mount. Figure 2-5: Swing-ARM for the FPM-2150G series Chapter 2 System Setup Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
2.2.3 Power adapter The power adapter bracket is attached to the rear of the FPM-2150G. Simply detach the small bracket at the rear side of the monitor by screwing the four screws. FPM-2150G User's Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
Page 23
Note: If you find that the brightness of LCD is dark, please follow the steps to adjust it. 1. Find the OSD in the rear side of FPM-2150G 2. Press two buttons, " " & " " , at the same time. 3.
A.2 Keypad Interface The keypad interface provides driver for a dual color LED for status indication. AUTO Press this button to execute auto adjustment process. Presses to show the OSD screen or select an item for changing its setting. To move between items or increase item setting. EXIT To close the selected item or the whole OSD screen.
A.3 OSD Function Each selected value is stored into LCD memory after SEL signal input or time out. The stored values are not affected if the power is turned off. But the selected value is not available in case a selected mode is changed before time out or power is turned off before time out.