30.1 Overview
This chapter shows you how to configure system related settings, such as system time, password,
name, the domain name and the inactivity timeout interval.
30.2 The Time Screen
To change your VMG's time and date, click Maintenance > Time. The screen appears as shown.
Use this screen to configure the VMG's time based on your local time zone.
Figure 123 Maintenance > Time
The following table describes the fields in this screen.
Table 99 Maintenance > Time
LABEL
Current Date/Time
Current Time
Current Date
Time Protocol
Time Server
Address
Time Zone
Time zone
VMG5313-B10A/-B30A Series User's Guide
C
DESCRIPTION
This field displays the time of your VMG.
Each time you reload this page, the VMG synchronizes the time with the time server.
This field displays the date of your VMG.
Each time you reload this page, the VMG synchronizes the date with the time server.
This is the time server protocol that your time server uses.
Enter the IP address or URL (up to 29 extended ASCII characters in length) of your time
server
Leave this field blank if you don't want to configure the time server.
Check with your ISP/network administrator if you are unsure of this information.
Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
HAPTER
Time Settings
3 0
249