Table of Contents
Advertisement
Chapter 7 Wireless
Click Network Setting > Wireless > WPS. The following screen displays. Select Enable and click
Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Figure 31 Network Setting > Wireless > WPS
The following table describes the labels in this screen.
Table 19 Network Setting > Wireless > WPS
LABEL
WPS
Method 1
Connect
Method 2
Register
Method 3
Release
Configuration
Generate New
PIN Number
Apply
Cancel
96
DESCRIPTION
Select Enable to activate WPS on the VMG.
Use this section to set up a WPS wireless network using Push Button Configuration (PBC).
Click this button to add another WPS-enabled wireless device (within wireless range of the
VMG) to your wireless network. This button may either be a physical button on the outside
of device, or a menu button similar to the Connect button on this screen.
Note: You must press the other wireless device's WPS button within two minutes of pressing
this button.
Use this section to set up a WPS wireless network by entering the PIN of the client into the
VMG.
Enter the PIN of the device that you are setting up a WPS connection with and click
Register to authenticate and add the wireless device to your wireless network.
You can find the PIN either on the outside of the device, or by checking the device's
settings.
Note: You must also activate WPS on that device within two minutes to have it present its PIN
to the VMG.
Use this section to set up a WPS wireless network by entering the PIN of the VMG into the
client.
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the VMG.
The PIN (Personal Identification Number) of the VMG is shown here. Enter this PIN in the
configuration utility of the device you want to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click the Generate New PIN Number button to have the VMG create a new PIN.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
VMG5313-B10A/-B30A Series User's Guide
Advertisement
Table of Contents
