Table of Contents
Advertisement
28.1 Overview
This chapter explains how to configure the VMG's TR-069 auto-configuration settings.
28.2 The TR-069 Client Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your VMG, can be managed
over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending Remote
Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible Markup
Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the VMG, modify settings, perform firmware
upgrades as well as monitor and diagnose the VMG. You have to enable the device to be managed
by the ACS and specify the ACS IP address or domain name and username and password.
Click Maintenance > TR-069 Client to open the following screen. Use this screen to configure
your VMG to be managed by an ACS.
Figure 120 Maintenance > TR-069 Client
The following table describes the fields in this screen.
Table 97 Maintenance > TR-069 Client
LABEL
Inform
Inform Interval
ACS URL
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password
VMG5313-B10A/-B30A Series User's Guide
DESCRIPTION
Select Enable for the VMG to send periodic inform via TR-069 on the WAN. Otherwise,
select Disable.
Enter the time interval (in seconds) at which the VMG sends information to the auto-
configuration server.
Enter the URL or IP address of the auto-configuration server.
Enter the TR-069 password for authentication with the auto-configuration server.
C
HAPTER
TR-069 Client
2 8
245
Advertisement
Table of Contents
