Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 48 Port Triggering: Configuration Add/Edit
LABEL
Active
Service Name
WAN Interface
Trigger Start
Port
Trigger End
Port
Trigger Protocol
Open Start Port
Open End Port
Open Protocol
OK
Cancel
11.4 The DMZ Screen
In addition to the servers for specified services, NAT supports a default server IP address. A default
server receives packets from ports that are not specified in the NAT Port Forwarding Setup
screen.
Figure 69 Network Setting > NAT > DMZ
The following table describes the fields in this screen.
Table 49 Network Setting > NAT > DMZ
LABEL
Default Server
Address
Apply
Cancel
VMG5313-B10A/-B30A Series User's Guide
DESCRIPTION
Select the check box to enable this rule.
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
Select a WAN interface for which you want to configure port triggering rules.
The trigger port is a port (or a range of ports) that causes (or triggers) the VMG to record
the IP address of the LAN computer that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Select the transport layer protocol from TCP, UDP, or TCP/UDP.
The open port is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The VMG forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Select the transport layer protocol from TCP, UDP, or TCP/UDP.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Enter the IP address of the default server which receives packets from ports that are not
specified in the NAT Port Forwarding screen.
Note: If you do not assign a Default Server Address, the VMG discards all packets received
for ports that are not specified in the NAT Port Forwarding screen.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Chapter 11 Network Address Translation (NAT)
161
Advertisement
Table of Contents
