The Dns Route Screen - ZyXEL Communications VMG5313-B10A User Manual

Table 30 Routing: Add/Edit (Sheet 2 of 2)
LABEL
IP Subnet Mask
Use Gateway IP
Address
Gateway IP
Address
Use Interface
Apply
Cancel

9.3 The DNS Route Screen

Use this screen to view and configure DNS routes on the VMG. Click Network Setting > Routing
> DNS Route to open the following screen.
Figure 51 Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
Table 31 Network Setting > Routing > DNS Route
LABEL
Add new DNS
Route
#
Status
Domain Name
WAN Interface
Modify
VMG5313-B10A/-B30A Series User's Guide
DESCRIPTION
If you are using IPv4 and need to specify a route to a single host, use a subnet mask of
255.255.255.255 in the subnet mask field to force the network number to be identical to
the host ID. Enter the IP subnet mask here.
The gateway is a router or switch on the same network segment as the device's LAN or WAN
port. The gateway helps forward packets to their destinations.
If you want to use the gateway IP address, select Enable.
Enter the IP address of the gateway.
Select the WAN interface you want to use for this static route.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Click this to add a new DNS route.
This is the index number of a DNS route.
This field displays whether the DNS route is active or not. A yellow bulb signifies that this
route is active. A gray bulb signifies that this route is not active.
This is the host name or domain name of the DNS route entry.
This is the WAN connection through which the VMG forwards DNS requests for this domain
name.
Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.
Chapter 9 Routing
133