Table of Contents
Advertisement
Chapter 4 Tutorials
IPv6/IPv4 Mode
Account Information
802.1p
802.1q
PPP User Name
PPP Password
PPP Connection Trigger
PPPoE Passthrough
MTU
IP Address
Primary DNS Server
Secondary DNS Server
Others
You should see a summary of your new Ethernet connection setup in the Broadband screen as
5
follows.
Try to connect to a website to see if you have correctly set up your Internet connection. Be sure to
contact your service provider for any information you need to configure the WAN screens.
4.4 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet.
In this wireless network, the VMG serves as an access point (AP), and the notebook is the wireless
client. The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the VMG. Then he can set up a wireless
network using WPS
38
IPv4
0
1
1234@ETHER-Ex.com
ABCDEF!
Auto Connect
Enabled
1492
192.168.1.40
192.168.5.5
192.168.5.6
PPPoE Passthrough: Disabled
NAT: Enabled
IGMP Multicast Proxy: Enabled
Apply as Default Gateway: Enabled
(Section 4.4.2 on page
40) or manual configuration
(Section 4.4.3 on page
44).
VMG5313-B30A User's Guide
Advertisement
Table of Contents
