Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the VMG to its
factory defaults. The following warning screen appears.
Figure 133 Reset Warning Message
Figure 134 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your VMG.
Refer to
Section 1.7 on page 21
33.3 The Reboot Screen
System restart allows you to reboot the VMG remotely without turning the power off. You may need
to do this if the VMG hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the VMG reboot. This does not affect the
VMG's configuration.
Figure 135 Maintenance > Reboot
VMG5313-B10A/-B30A Series User's Guide
for more information on the RESET button.
Chapter 33 Backup/Restore
257