Odu; Fast; Fast: Set; Fast: View - Comtech EF Data CDM-600 Installation And Operation Manual

CDM-600 Satellite Modem
Front Panel Operation
6.3.7

ODU

This permits the CDM-600 to interface directly with a Comtech RF Transceiver (Outdoor
Unit, or ODU. This is accomplished using a low-speed, half-duplex FSK link on the Rx
IF port, with a carrier frequency around 2.7 MHz.
ODU CONTROL=DISABLE
SYSTEM TYPE=STANDALONE (STANDALONE, 1:1)
6.3.8

FAST

FAST OPTIONS: SET
MOTHERBOARD S/N 123456789
Select whether to change or view current settings using [←][→] arrow keys.
6.3.8.1

FAST: SET

ENTER 20 CHAR CODE BELOW AND PRESS ENTER
FAST is the way to enable new options in the modem. Obtain the FAST code for the new
option from Comtech EF Data. Enter the code carefully. Use the [←][→] arrow keys to
move the cursor to each character. Use the [↑] [↓] arrow keys to edit the character, then
press ENTER. The modem will respond with "Configured Successfully" if the new
FAST option has been accepted.
6.3.8.2

FAST: VIEW

VIEW OPTIONS:
20 Mbps
Use the [←][→] arrow keys to show which FAST options are currently installed.
(DISABLE, ENABLE)
VIEW
XXXXXXXXXXXXXXXXXXXX
10 9 8 7 6 5 4 3 2 1
INSTALLED
6–42
HW REV 1.0
Revision 7
MN/CDM600.IOM