Account Code Entry Mode - Panasonic KX-TA624 Installation Manual

4.2 System Programming
Description
Selection
Default
Programming

Account Code Entry Mode

Selects the account code input mode for each extension jack. There
are four account code modes: Option, Forced, Verify-All and
Verify-Toll.
Option mode:
Forced mode:
Verify – All mode: The user must always enter a pre-assigned
Verify – Toll mode: The user can enter an assigned account code
• Jack number: 01 – 24,
• Option / Forced / Verify – All / Verify – Toll
All jacks – Option
1. Enter 605.
Display: Call Accounting
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display: #01:Option
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
The user can enter any account code, if
needed.
The user must always enter an account code.
The code can be any number.
account code to make an outside call.
to override toll restriction. The toll restriction
COS numbers 3 through 5 will be changed
temporarily to the COS number 2. (The COS
numbers 1 and 2 will not be changed.)
( = all jacks)
System Programming
605
4-105