Advanced Chipset Configuration Subscreen - Intel AP440FX Technical Product Specification

3.14.7.13 Secondary PCI IDE Status
Displays the current status of the Secondary PCI IDE Interface from the selectable setting above.
This is an informational field and is not accessible.
3.14.7.14 Floppy Status
Reports the current status of the floppy drive from the selectable setting above. There are no
options.
3.14.7.15 Serial Port 1 Status
Reports the current status of serial port 1 from the selectable setting above. There are no options.
3.14.7.16 Serial Port 2 Status
Reports the current status of serial port 2 from the selectable setting above. There are no options.
3.14.7.17 Parallel Port Status
Reports the current status of the parallel port from the selectable setting above. There are no
options.

3.14.8 Advanced Chipset Configuration Subscreen

This section describes the options available on the Advanced Chipset Configuration Subscreen.
3.14.8.1 Base Memory Size
Sets the size of the base memory. The options are:
•
512 KB
•
640 KB (default)
3.14.8.2 ISA LFB Size
Sets the size of the linear frame buffer. The options are:
• •
Disabled (default)
•
1 MB
If this is set to 1 MB, the ISA LFB Base Address field appears.
3.14.8.3 ISA LFB Base Address
Reports the base address of the LFB. There are no options.
The base address is 16 MB minus the ISA LFB size value. This field does not appear if the ISA
LFB Size is set to Disabled.
Motherboard BIOS and Setup Utility
61