Table of Contents
Advertisement
3.14.4.7
Num Lock
Sets the state of the Num Lock feature on your keyboard when you boot. The options are:
• •
Off (default)
•
On
3.14.4.8
Setup Prompt
Turns on (or off) the "Press <F1> Key if you want to run Setup" prompt during the power-up
sequence. The options are:
•
Disabled
•
Enabled (default)
NOTE
This option has no effect on your ability to access the Setup program. It only toggles the prompt.
3.14.4.9
Hard Disk Pre-Delay
Sets the hard disk drive pre-delay. The options are:
•
Disabled (default)
•
3 seconds
•
6 seconds
•
9 seconds
•
12 seconds
•
15 seconds
•
21 seconds
•
30 seconds
When enabled, this option causes the BIOS to wait the specified time before it accesses the first
hard drive.
If your computer contains a hard drive, and you don't see the drive type displayed during boot-up,
the hard drive may need more time before it is able to communicate with the controller. Setting a
pre-delay provides additional time for the hard drive to initialize.
3.14.4.10
Typematic Rate Programming
Sets the typematic rates. The options are:
•
Default (default)
•
Override
Choosing Override enables the Typematic Rate Delay and Typematic Rate setup options.
Motherboard BIOS and Setup Utility
55
Advertisement
Table of Contents
