Table of Contents
Advertisement
3.14.8.8
Memory Error Detection
Sets the type of error detection or correction. The options are:
•
Disabled (default)
•
ECC
•
Parity
This field appears if either ECC or Parity SIMMs are detected. Parity and ECC SIMMs can be
configured to run either as Parity or ECC (e.g. Parity SIMMs may be configured to run in ECC
mode.)
3.14.8.9
Bank 0
Reports the type of memory found in the Bank 0 SIMM slots. There are no options.
3.14.8.10
Bank 1
Reports the type of memory found in the Bank 1 SIMM slots. There are no options.
3.14.9 Power Management Configuration Subscreen
This section describes the options available on the Power Management Subscreen.
3.14.9.1
Advanced Power Management (APM)
Enables or disables the APM support in your computer's BIOS. The options are:
•
Disabled
• •
Enabled (default)
Power Management only works with APM-capable operating systems to manage power
consumption in your computer.
3.14.9.2
IDE Drive Power Down
Spins down IDE drives when the computer goes into power managed mode. The options are:
•
Disabled
•
Enabled (default)
This field does not appear if APM is disabled.
3.14.9.3
VESA Video Power Down
Sets any VESA compliant monitor to be power managed when the computer goes into power
managed mode. The options are:
•
Disabled
•
Standby
•
Suspend
•
Sleep (default)
This field does not appear if APM is disabled.
Motherboard BIOS and Setup Utility
63
Advertisement
Table of Contents
