Priming The Flavor System - VKI Technologies Eccellenza Café Operating Manual

Eccellenza Café – Operating Manual
3. Remove the cap from the new bottle and install the bottle on its respective
support.
NOTE: Place a paper towel below the tube as residual flavoring
4. Carefully push the flavor tube completely onto the small fitting on top of the
flavor bottle.
5. Repeat this procedure for the other two bottles (Flavor 2 and Flavor 3). It is
recommended to do one bottle at a time so as not to mix up the initial
locations of the bottles and the flavor tubes.
6. Once all are done, close and lock the front door.

Priming the Flavor System

When first installing the Eccellenza Café, the flavor system must be primed.
This is done by entering the Programming section and following the path
indicated below.
The "Test Quantity" button will dispense the required amount of flavor for
the beverage selected. Once the flavor begins to exit the spout, you may exit
this menu and repeat for the remaining flavors.
NOTE: The flavorings used in the Eccellenza Café are NOT sweeteners.
Increasing the quantity of flavoring dispensed into the cup will not make the
beverage any sweeter.
20
may drip from the tubing.
SET PRODUCT
 Capp Regular (or any other beverage)
 Set Flavor
 Flavor 1 Time
 Test Quantity
March 3, 2014