Replacing The Flavoring Bottles - Zavida Model (If Applicable) - VKI Technologies Eccellenza Café Operating Manual

4. Remove the cap and foil from the new bottle. This cap is not required.
5. Install the silicone cap and tube removed from the old bottle onto the new
bottle.
6. Re-install the new flavor bottle onto the support.
7. Check to make sure the tube is pushed completely to the bottom of the
bottle.
8. Repeat this procedure for the other two bottles (Flavor 2 and Flavor 3). It is
recommended to do one bottle at a time so as not to mix up the initial
locations of the bottles.
9. Once all are done, close and lock the front door.
Replacing the Flavoring Bottles - Zavida Model
1. Unlock and open the front door.
2. Remove the tubing from the Flavor 1 bottle (bottom bottle) by holding the bottle
and pulling the tubing off of the small fitting on top of the bottle.
a) Flavor 1 = Hazelnut*
b) Flavor 2 = French Vanilla*
c) Flavor 3 = Irish Cream*
*
For reference purposes only. Different flavors can be used (if available).
2
2 3
2 3
3
1
1
1
March 3, 2014
Eccellenza Café – Operating Manual
(if applicable)
19