Setup Procedure For Pptp - Intellinet 524803 User Manual

Click "Continue" to go back and continue with the router setup
procedure, or click "Apply" to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router is
rebooting.)
If you want to reset all settings on this page back to previously
saved values, click "Cancel."

2-5-5 Setup Procedure for PPTP

PPTP requires two kinds of settings: WAN Interface Settings (set
up an IP address) and PPTP Settings (PPTP user name and
password). First, the WAN Interface Settings:
Select how you obtain an IP address from your service provider
here. You can choose "Obtain an IP address Automatically" (equal
to DHCP; refer to the Cable Modem section above), or "Use the
Following IP Address" (i.e., static IP address).
WAN interface settings must be correctly set, or the Internet
connection will fail even if the PPTP settings are correct. Contact
49