Table of Contents
Advertisement
Auto-reconnect
Click on NEXT to proceed to the next page (step 3) DNS.
1.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
Parameter
computer when you are not using it. This function also may not
work with some ISP. So please make sure this function can work
properly when you use this function in the first time, especially
your ISP charge you by time used.
Check this box to enable Auto-reconnect. If Auto-reconnect is
enabled, the router will automatically connect to the ISP in the
first time when a user try to access Internet after the WAN line
being disconnected due to idle time out.
Description
21
Advertisement
Table of Contents
