Intellinet 524803 User Manual page 76

CTS Protect (10): Enabling this setting will reduce the chance of
Tx Power (11):
WMM (12):
After you finish these wireless settings, click "Apply" (13) and the
following message will be displayed on your Web browser:
Click "Continue" to go back and continue with the router setup
procedure, or click "Apply" to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router reboots.)
your wireless router (set the option to "Disable")
so only those who know the ESSID of your
wireless router can connect.
radio signal collisions between 802.11b and
802.11g/n wireless access points. It's
recommended to set this option to "Auto" or
"Always." However, if you set to "None," your
wireless router should be able to work fine.
You can set the output power of the wireless
radio. Unless you're using this wireless router in
a really big space, you may not have to set
output power to 100%. This will enhance
security (distant malicious/unknown users
won't be able to reach your wireless router).
Wi-Fi MultiMedia will enhance the data transfer
performance of multimedia content when it's
being transferred over the wireless network. If
you don't know what it is or aren't sure if
you need it, it's safe to set this option to
"Enable" (though the default is "Disable").
69