Table of Contents
Advertisement
3 Setup Wizard
This router provides a Setup Wizard tool to configure the ADSL settings. This
wizard collects some ISPs' ADSL settings so that you can easily configure the
router's ADSL settings by only selecting the ISP vendor from the wizard.
If you cannot find your ISP from the list in the wizard, manually set the ISP
information through the wizard.
3.1 Getting Started
Before starting, check the following items:
1. Make sure that you have connected the ADSL cable to the router correctly.
When the ADSL cable is worked normally, the ADSL LED will be on.
2. Un-install any dial-up programs installed previously for the USB modem or
other dial-up devices.
3. It is recommended that you initially configure the router through the Ethernet
cable before you set the wireless functions.
This wizard can be run in Windows 98SE/Me/2000/XP/Vista. The following
procedures are operated in Windows XP. (Procedures are similar for Windows
98SE/Me/2000/Vista.)
1. Insert the enclosed setup CD into your CD-ROM drive. The Autorun.exe
program should be executed automatically. If not, run Autorun.exe manually
from the "Autorun" folder on the CD.
2. The following screen will be displayed. Click "Setup Wizard."
6
Advertisement
Table of Contents
