Wi-Fi Protected Access (Wpa) - Intellinet 524803 User Manual

After you finish the WEP settings, click "Apply" (10) and the
following will be displayed on your Web browser:
Click "Continue" to go back and continue with the router setup
procedure, or click "Apply" to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router reboots.)

2-7-3-3 Wi-Fi Protected Access (WPA)

When you select this mode, the wireless router will use WPA
encryption, and the following setup menu will be shown on your
Web browser:
Below are descriptions of the options:
WPA Unicast
Cipher Suite (2):
Select a type of WPA cipher suite.
Options are "WPA (TKIP)," "WPA2 (AES)" and
"WPA2 Mixed." You can select any one of them,
but you have to make sure your wireless client
supports the cipher you select.
73
1
2
3
4
5