Reset (9):
Virtual Server
Table (10):
Delete (11):
Delete All (12):
Reset (13):
After you finish the settings, click "Apply" (14) and the following
message will be displayed on your Web browser:
Click "Continue" to go back and continue with the router setup
procedure, or click "Apply" to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router reboots.)
If you want to reset all settings on this page back to previously
saved values, click "Cancel."
Remove all entered values.
All existing virtual server mappings will be
displayed here.
Select a virtual server mapping by clicking the
"Select" box of the mapping, then click "Delete
Selected" to remove the mapping. If there's no
existing mapping, this button will be grayed out.
Delete all mappings in the virtual server table.
Unselect all mappings.
91