Simplified Operation Of The Vf-S9 - Toshiba TOSVERT VF-S9 Instruction Manual

3.2

Simplified Operation of the VF-S9

The procedures for setting operation frequency and the methods of operation can be selected from the following.
Run / stop
Frequency setting
3
Use the basic parameters
for selecting.
Title
[Steps in setting parameters]
Key operated
* Pressing the MON key twice returns the display to standard monitor mode (displaying operation frequency).
(1) Run and stop using external signals to the terminal
:
board
(2) Run and stop from the operation panel
(1) Setting using external signals to the terminal board
(0-10Vdc, 4-20mAdc)
:
(2) Setting using the operation panel
(3) Setting using the potentiometer on the inverter
main unit
(command mode selection) and
Function
Command mode selection 0: Terminal board; 1: Operation panel
Frequency setting mode 0: Terminal board; 1: Operation panel;
selection 2: Internal potentiometer
LED display
Displays the operation frequency (operation stopped). (When standard
monitor display selection
Press the MON key to display the first basic parameter
(automatic acceleration/deceleration).
Press either the
Press the ENTER key to display the parameter setting. (Standard default
setting: )
Change the parameter to
Press the ENTER key to save the changed parameter.
parameter set value are displayed alternately.
Press either the
Press the ENTER key to display the parameter setting. (Standard default
setting:
Change the parameter to (Operation panel) by pressing the
Press the ENTER key to save the changed parameter.
parameter set value are displayed alternately.
(frequency setting mode selection)
Adjustment range
Operation
is set to
key or the key to select "
(Terminal board) by pressing the
key or the key to select "
)
C-6
E6580757
Default setting
1
2
[Operation frequency])
."
key.
and the
."
key
and the