Toshiba TOSVERT VF-S9 Instruction Manual page 60

Steps for returning all parameters to standard default setting
Key operated LED display
If there is something that you do not understand during this operation, press the MON key several
times and start over again from the step of
Operation
Displays the operation frequency (perform during operation stopped).
Press the MON key to display the first basic parameter
(automatic acceleration/deceleration).
Press the key or the key to change to
Pressing the ENTER key displays the programmed parameters.
( will always display zero "
ting on the left.)
Press the key or the key to change the set value. To return to
standard factory default setting, change to "
Pressing the ENTER key displays "
rameters to factory default setting.
The monitor returns to the display of setup parameters.
Set the setup parameters. See. 4.1.4.
display.
D-9
E6580757
.
" on the right, the previous set-
".
" while returning all pa-
4