Base Frequency; Parameter Setting - Toshiba TOSVERT VF-S9 Instruction Manual

Output frequency (Hz)

Parameter setting

Title
Upper limit frequency
Lower limit frequency
* Setting value depending on the end of Type – form.
AN, WN : 60Hz, WP : 50Hz

5.11 Base frequency

: Base frequency 1
• Function
Sets the base frequency in conformance with load specifications or the motor's rated frequency.
Note: This is an important parameter that determines the constant torque control area.
Base frequency voltage
Title
Base frequency 1
* Setting value depending on the end of Type – form.
AN, WN : 60Hz, WP : 50Hz
Upper limit
frequency
Frequency setting signal
Frequencies that go
higher than will
not be output.
Function
0.5 ∼
0.0 ∼
Function
25 ∼ 400 (Hz)
E-13
Lower-limit
Output frequency (Hz)
frequency
Frequency setting signal
The output frequency
cannot be set at less
than .
Adjustment range
(Hz)
(Hz)
Output frequency (Hz)
Adjustment range
E6580757
Setting after setup
50 or 60 *
0.0
5
Setting after setup
50 or 60 *