Error code
(Note) Past trip records (trip records retained or trips that occurred in the past) can be called up. (Refer to 8.1
"Status monitor mode" for the call-up procedure.)
(*) Strictly speaking, this code is not an error code; this code is displayed to show the absence of error
Example of call-up of trip information
Item displayed
*1
Parameter setting
mode
Operation fre-
quency
Direction of rota-
tion
Operation fre-
quency command
Load current
Input (DC) voltage
8
Output voltage
Input terminal
Output terminal
CPU version
(Continued overleaf)
Communi-
cation No.
(*)
0
No error
when the past trip monitor mode is selected.
Key
LED
operated
display
Description
Communi-
cation No.
Status monitor mode (The code blinks if a trip oc-
curs.)
The motor coasts and comes to a stop (coast
stop).
The first basic parameter "Automatic accelera-
tion/deceleration (
The operation frequency at the occurrence of a trip
FE00
is displayed.
The direction of rotation at the occurrence of a trip
FE01
is displayed. (
: forward run,
The operation frequency command value at the
FE02
occurrence of a trip is displayed.
The inverter output current at the occurrence of a
FE03
trip is displayed. (Default setting: unit %)
The inverter input (DC) voltage at the occurrence
FE04
of a trip is displayed. (Default setting: unit %)
The inverter output voltage at the occurrence of a
FE05
trip is displayed. (Default setting: unit %)
The ON/OFF status of each of the control signal
input terminals (F, R, RST, S1, S2 and S3) at the
occurrence of a trip is displayed in bits.
ON:
FE06
OFF:
Input terminal
(S3)
Input terminal
(S2)
The ON/OFF status of each of the control signal
output terminals (RY, OUT and FL) at the occur-
rence of a trip is displayed in bits.
FE07
ON:
OFF:
Output terminal (FL)
FE08
The version of the CPU is displayed.
H-4
E6580757
Description
)" is displayed.
: reverse run)
Input terminal (F)
Input terminal (R)
Input terminal (RST)
Input terminal (S1)
Output terminal
(RY)
Output terminal (OUT)