Before You Begin; Product Registration - 3Com EtherLink 10 User Manual

1

Product Registration

B Y
EFORE
The United States government places registration requirements on using data
encryption products. To obtain customer support for 3CR990 NICs, you are
required to register your NIC product with 3Com. You can register this product
electronically or by U.S. mail.
In addition to enabling customer support for your NIC, registration also entitles
you to receive upgrade information and advance feature information.
The original version of Windows 95 (Build 950) does not automatically allow
NOTE:
you to change your default browser, even if Microsoft Internet Explorer is not present.
If you are running this version of Windows 95 on your PC, access the following site to
register your 3CR990 NIC product:
NOTE: To be able to register electronically, a web browser must be installed on your
system. You must also have an active Internet service provider (ISP) connection.
To register electronically:
1 Insert the EtherCD (that shipped with this product) in your CD-ROM drive.
The EtherCD Welcome screen appears.
If the Welcome screen does not appear
Go to: EtherCD Navigation
2 Click Register Product , and then Register Online .
3 Follow the prompts as they appear.
To register by U.S. mail:
1 Find and remove the registration card included in the EtherLink 10/100 PCI
Network Interface Card Quick Guide that shipped with this product.
2 Fill out the registration card and drop it in the mail. (No postage is required.)
B
OU EGIN
http://www.3com.com/productreg
.
.