Windows 95 Osr2; Windows Nt 4.0 - 3Com EtherLink 10 User Manual

Windows 95 OSR2

Windows NT 4.0

To upgrade to the current NIC driver in a PC running Windows 95 OSR2:
1 Make sure that the EtherCD is in the CD-ROM drive.
2 Right-click the My Computer icon, and then select Properties.
3 Select the Device Manager tab, and then double-click Network adapters.
4 Select the name of the 3Com NIC, and then click Properties.
5 Select the Driver tab, and then click Update Driver.
The Update Device Driver Wizard screen appears.
6 Select the No, select driver from list option, and then click Next.
The Select Device screen appears.
7 Click Have Disk.
The Install From Disk screen appears.
8 Make sure the path to the CD-ROM drive appears in the entry box, and then
click OK.
The Select Device screen reappears.
9 Click OK.
After files are copied and updated, the 3Com EtherLink screen Driver tab reappears.
10 Click Close.
The NIC driver is installed.
To upgrade to the current NIC driver:
1 Make sure that the EtherCD is in the CD-ROM drive.
2 Double-click the Network icon.
The Network screen appears.
3 Select the Adapters tab.
The 3Com EtherLink NIC is selected in the Network Adapters list box.
4 Click Update.
The Windows NT Setup screen appears.
5 Enter the path to the CD-ROM drive, and then click Continue.
Files are copied, and then the Network screen appears.
6 Click Close.
More files are copied, and then the Network Settings Change dialog box appears
prompting you to restart your computer.
7 Click Yes.
The NIC driver is installed.
Windows NT 4.0 49