Verifying Successful Installation; Windows 2000; Windows 98 And Windows 95; Windows Nt 4.0 - 3Com EtherLink 10 User Manual

34 C 4: W
HAPTER INDOWS
Verifying Successful
Installation

Windows 2000

Windows 98 and
Windows 95

Windows NT 4.0

D
RIVERS
To change configuration settings
Go to: 3Com DOS Configuration
This section describes how to verify that a NIC installation under Windows 2000,
Windows 98, Windows 95, or Windows NT is successful.
Follow the instructions appropriate for your operating system.
To verify that the NIC is successfully installed:
1 Right-click the My Computer icon, and then click Properties.
2 Select the Hardware tab, and then click Device Manager in the middle panel.
3 Click the + symbol next to Network Adapters in the list.
The absence of a red X or a yellow exclamation point (!) next to the name of the
NIC name confirms successful installation.
If you encounter problems
Go to: Troubleshooting.
To verify that the NIC is successfully installed:
1 Right-click the My Computer icon, and then click Properties.
The System Properties screen appears.
2 Select the Device Manager tab.
3 Double-click Network adapters and make sure that the name of the
NIC appears.
The absence of a red X or a yellow exclamation point (!) next to the name of
the NIC name confirms successful installation.
If you encounter problems
Go to: Troubleshooting.
To verify that the NIC is successfully installed:
1 In the Windows task bar, click Start, Programs, Administrative Tools, and
then Windows NT Diagnostics.
The Windows NT Diagnostics screen appears.
2 Select the Resources tab.
If EL99x appears in the displayed list in the Device column, the driver is
successfully installed.
If you encounter problems
Go to: Troubleshooting.
3 Click OK to exit.
Program.