3Com EtherLink 10 User Manual page 54

54 C 8: C
HAPTER ONFIGURATION
Network Parameter Factory Default Setting
NetBoot ROM Disabled
Duplex Auto Select
Media Type Auto Select
SMB Bus Address
Remote Wakeup Default Setting
TCP/IP Keep Alive Disabled
Workgroup Keep Alive Disabled
4 Select a new value from the list of available options in the Set Value list box.
5 Repeat the process for each setting that you want to change.
Before clicking OK, you can undo any unsaved configuration changes that you
make. To undo changes, click Undo Changes.
To reset the default settings, click Set Factory Defaults. (See the table following
step 6.)
6 To save the new settings, click OK.
The following table shows the factory default settings for network parameter
default options. For more information about Remote Wake-Up features and
Alerts, see the WIN2000.TXT file in the Help directory on the EtherCD that
shipped with this product
Options for Factory
Default Setting
none
none
none
none
Magic Packet
Link Event
Wake-On-Error
Wake-On-Timer
ARP Replies
DHCP Lease Renewal
Wake-On-ARP
Wake-On-Ping
Respond-To-Ping
MAC Keep-Alive
Novell Watchdog Replies
Factory Default Settings for Options
none
none
none
none
Enabled
Disabled
Disabled
Selecting any setting automatically sets this
option to Enabled.
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled