Xerox WorkCentre 3615 System Administrator Manual page 51

Editing SNMPv3 Properties
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address of your printer, see
page 12.
Click Properties > Protocols > Edit SNMPv3 Properties.
2.
3. To create the SNMP administrator account, for Account Enabled, select Enabled. An administrator
account can provide more extensive access to the objects on the printer.
4. For Authentication Password, type and retype the SNMP administrator account password. The
authentication password is used when sending authenticated SNMPv3 messages.
5. For Privacy Password, type and retype a password. The privacy password is used when sending
private, encrypted SNMPv3 messages.
Under Print Drivers/Remote Client Account, for Account Enabled, select Enabled. Account Enabled
6.
creates an account for bi-directional printer drivers and Xerox remote clients. When this feature is
enabled, it allows applications using SNMPv3, such as such as Xerox printer drivers, to communicate
with the printer.
Under Print Drivers/Remote Client Account, for Reset to default password, click Reset as needed.
7.
8. Click Save Changes.
® ®
Xerox WorkCentre 3615 Black and White Multifunction Printer
Network Connectivity
Finding the IP Address of Your Printer
System Administrator Guide
on
51