Configuring Output Settings - Xerox WorkCentre 3615 System Administrator Manual

Configuring Output Settings

Use this menu to configure settings concerning the output of the printer.
At the printer control panel, press the Machine Status button.
1.
2. Touch Tools > Admin Settings.
Touch System Settings, then touch Output Settings.
3.
4. To set the default paper size, touch Default Paper Size, touch an option, then touch OK.
Note: The default for Default Paper Size varies, depending on the country-specific default setting.
5. To print the user ID on the output page, touch Print ID, touch a position where the ID is printed,
then touch OK.
To have the printer output PDL data as text, touch Print Text > On > OK. The printer does not
6.
support printing in PDL.
7. To specify if a banner page is printed:
Touch Banner Page > Insert Position.
a.
b. Touch an option:
Off: Directs the printer not to print a banner page.
•
• Front: Directs the printer to insert a banner page before the first page of each copy.
• Back: Directs the printer to insert a banner page after the last page of every copy.
Front and Back: Directs the printer to insert a banner page before the first page and after
•
the last page of every copy.
Touch OK.
c.
d. To select the tray used to print the banner page, touch Specify Tray, then touch an option.
Touch OK.
e.
To return to the Output Settings menu, touch the Back arrow.
f.
8. To select what action the printer takes when a paper size mismatch occurs:
Touch Size Mismatch, then select an option.
a.
• Off: Directs the printer to print with no further action.
Crop to Size: Directs the printer to trim the print to fit the printable area of the page.
•
• Scale to Size: Directs the printer to reduce or enlarge the print image to fit the printable
area of the page.
Use Size in Bypass Tray: Directs the printer to use the paper size in the Bypass Tray.
•
b. Touch OK.
To have letterhead print on both sides of the paper, touch Letterhead 2-Sided > Enable > OK.
9.
10. To have information pages print on both sides of the paper, touch Report 2-Sided Print > 2-Sided >
OK.
11. Touch the Back arrow to return to the previous menu, or press the Services Home button to return
to Service Home.
® ®
Xerox WorkCentre 3615 Black and White Multifunction Printer
Initial Setup
System Administrator Guide
23