Configuring Ssl Settings; Configuring Ipsec Settings - Xerox WorkCentre 3615 System Administrator Manual

To delete an IP filter rule:
1. Click an IP filter rule.
Click Delete.
2.
3. Click OK.

Configuring SSL Settings

Secure Sockets Layer (SSL) is a protocol that creates an encrypted connection between your printer and
a server.
Before you can enable SSL, create a digital certificate.
In CentreWare Internet Services, click Properties > Security > SSL.
1.
2. For Enable SSL, select the Enable SSL check box.
3. For Encryption Strength, select an option.
4. For Port Number, type a valid port number.
5. For LDAP - SSL/TLS Communication, select Enabled.
Note: If you do not select Enabled, queries to the LDAP server are not encrypted. SSL encryption is
still used for your connection over HTTP even if LDAP is not encrypted.
6. For SMTP - SSL/TLS Communication, select an option.
STARTTLS (if Available): This option scans for STARTTLS compatibility and, if available, uses
−
it.
STARTTLS: This option is for servers that require STARTTLS.
−
− SSL/TLS: This option is for servers that require SSL/TLS.
7. To view certificate details, click Certificate Management.
Click Save Changes.
8.

Configuring IPsec Settings

IPsec is a protocol suite that uses authentication or encryption of each IP packet in a datastream to
secure Internet Protocol (IP) communications. IPsec also includes protocols for cryptographic key
establishment and can be implemented as part of the overall security policy for your company.
® ®
Xerox WorkCentre 3615 Black and White Multifunction Printer
System Administrator Guide
Security
71