Setting Service Locks; Authentication Using A Card Reader System - Xerox WorkCentre 3615 System Administrator Manual

To change the passcode:
1. At the printer control panel, press the Machine Status button.
Touch Tools > Admin Settings.
2.
3. At the prompt, enter a four-digit passcode, then touch OK.
4. Use the Up or Down arrows to navigate, then touch Secure Settings.
Touch Panel Lock, then touch Change Passcode.
5.
6. At the prompt, enter a four-digit passcode, then touch OK.
At the prompt, enter the new passcode, then touch OK.
7.
At the prompt, re-enter the passcode, then touch OK.
8.
9. Touch the Back arrow to return to the previous menu, or press the Services Home button to return
to Service Home.

Setting Service Locks

A list of installed services appears in this menu and lets you configure the way they appear on the
control panel for non-authorized users. Each service can be set from a selection of access levels.
Note: Panel Lock must be enabled before setting the service locks.
To set the service locks:
From the Secure Settings menu, to navigate to the menu with the service listed, use the Up or Down
1.
arrows.
2. Touch a service name.
3. Touch an access option.
Enabled: Non-authorized users can access the service.
−
− Password Locked: Authorized users can access the service. Enter a passcode or, if network
authentication has been enabled, enter a user name and password.
− Disabled: Access to the service is blocked.
4. Touch OK.
After setting a service lock for fax access, at the Restart prompt, touch Close.
Note:

Authentication Using a Card Reader System

®
When Xerox Secure Access authentication is configured, users swipe a pre-programmed identification
card at the control panel. The printer compares the user credentials to the information stored on the
Convenience Authentication server.
For details, refer to the documentation provided with your authentication software.
® ®
Xerox WorkCentre 3615 Black and White Multifunction Printer
System Administrator Guide
Security
75