Xerox WorkCentre 3615 System Administrator Manual page 21

Configuring Audio Tones
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
Touch System Settings, then touch General.
3.
4. Touch Audio.
5. Select the tone to change, then select an option.
6. Touch OK.
7. Repeat for each tone that you want to set.
To return to the General menu, touch the Back arrow.
8.
Configuring the RAM Disk
1. At the printer control panel, press the Machine Status button.
Touch Tools > Admin Settings.
2.
3. Touch System Settings, then touch General.
4. Touch RAM Disk, then touch On.
Note: The RAM Disk feature is not available when the Device Memory option is installed.
5. To specify the amount of memory to allocate to the RAM Disk file system, touch Plus (+) or Minus
(-).
Touch OK.
6.
Setting the Startup Page
1. At the printer control panel, press the Machine Status button.
Touch Tools > Admin Settings.
2.
3. Touch System Settings, then touch General.
4. Touch Startup Page.
To print a Startup Page when the printer is turned on, touch On.
5.
6. Touch OK.
Configuring the Low Toner Alert Message
At the printer control panel, press the Machine Status button.
1.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
Touch Low Toner Alert Message.
4.
5. To display an alert message when the toner is low, touch On.
Touch OK.
6.
® ®
Xerox WorkCentre 3615 Black and White Multifunction Printer
Initial Setup
System Administrator Guide
21