Table of Contents
Advertisement
FS-8700-72 Secutron Manual
4.4.
Client Side Map Descriptors
4.4.1.
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Offset
Function
Node_Name
Length
Block_Type*
4.4.2.
Column Title
Secutron_Type
Secutron_Circuit
4.4.3.
Column Title
Scan_Interval
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver.com
FieldServer Specific Map Descriptor Parameters
Function
Name of this Map Descriptor
Name of Data Array where data
is to be stored in the FieldServer
Starting location in Data Array
Function
Descriptor
Name of Node to fetch data from
The number of devices on the
circuit the Map Descriptor must
detect
Used to enable packed bit when
using a Packed_Bit Data Array
on the Map Descriptor
Driver Specific Map Descriptor Parameters
Identifies the type of data the Map Descriptor
points to
Identifies the circuit or panel zone
Timing Parameters
Rate at which data is polled
Up to 32 alphanumeric characters
One of the Data Array names
from "Data Array" section above
0 to (Data_Array_Length-1) as
specified in "Data_Array" section
of
Client
Map
Rdbc, Passive_Client
One of the node names specified
in "Client Node Descriptor" above
0-999
Flag, -
Function
Function
Page 7 of 15
Legal Values
Legal Values
Poller, Device,
Function
0-99
Legal Values
>= 0s
Advertisement
Table of Contents
Need help?
Do you have a question about the FS-8700-72 Secutron Modul-R and is the answer not in the manual?