FS-8700-127 Hanning & Kahl HCS-R Manual
4.4.
Client Side Map Descriptors
4.4.1.
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Offset
Function
4.4.2.
Column Title
Node_Name
HCSR_OnFrom
HCSR_Loop
Length
Data_Type*
HCSR_Data_Stages*
4.4.3.
Column Title
Scan_Interval
2
Default for Digi_Input
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com
FieldServer Related Map Descriptor Parameters
Function
Name of this Map Descriptor
Name of Data Array where data
is
to
be
FieldServer
Starting location in Data Array
Function
of
Descriptor
Driver Related Map Descriptor Parameters
Function
Name of Node to fetch data from
For Passive_Client Map Descriptor
specify whether data From Loop or
On Loop should be stored.
For Passive_Client Map Descriptor
specify loop number for which data
should be stored.
Length of Map Descriptor
22 (min) for RDBC Map Descriptor:
24 if data_type is Dig_Input
21
for
Passive_Client
Descriptor.
It
also
HCSR_Data_Stages parameter
Refer to Appendix A
Specify how data will be stored.
Refer to Appendix A
Specify the number of stages to
keep history of data changes.
0 and 1 means no history
Timing Parameters
Rate at which data is polled
Up
characters
One of the Data Array names
stored
in
the
from "Data Array" section above
0 to maximum specified in
"Data Array" section above
Client
Map
RDBC, Passive_Client
One of the Node Names
specified
Descriptor" above
On, From, OnFrom
1,2,3,4
Map
22 or 24, 21
depends
upon
Ana_Input
Digi_Input
0,1,2,3
Function
Page 8 of 17
Legal Values
to
32
alphanumeric
Legal Values
in
"Client
Node
2
Legal Values
≥0.001s
Need help?
Do you have a question about the FS-8700-127 Hanning and is the answer not in the manual?