Card Reader Board - HP Split 13 x2 PC Maintenance And Service Manual

Card reader board

NOTE: The card reader board does not include the card reader board cable. The card reader board
cable is included in the Cable Kit, spare part number 736883-001. See
more Cable Kit spare part information.
Description
For use only on tablet models with WWAN capability
For use only on tablet models without WWAN capability
Before removing the card reader board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Remove the tablet battery (see
Remove the card reader board:
1. Release the system board ZIF connector (1) to which the card reader board cable is attached, and
then disconnect the card reader board cable from the system board.
2. Remove the two Phillips PM2.0×3.0 screws (2) that secure the card reader board to the
display assembly.
60 Chapter 4 Removal and replacement preliminary requirements
Back cover on page 38).
Tablet battery on page
Cable Kit on page 23
Spare part number
746491-001
736891-001
40).
for