Proximity Sensor Module - HP Split 13 x2 PC Maintenance And Service Manual

Hide thumbs Also See for Split 13 x2 PC:
Table of Contents

Advertisement

4.
Remove the tablet battery (5).
Reverse this procedure to install the tablet battery.

Proximity sensor module

Description
Proximity sensor module
NOTE:
The proximity sensor module does not include the proximity sensor module cable. The
proximity sensor module cable is included in the Cable Kit, spare part number 736883-001. See
Cable Kit on page 23
Before removing the proximity sensor module, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the tablet battery (see
for more Cable Kit spare part information.
Back cover on page
Tablet battery on page
38).
40).
Removal and replacement procedures
Spare part number
736890-001
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents