HP Split 13 x2 PC Maintenance And Service Manual page 51

4.
Remove the back cover (see
5.
Remove the tablet battery (see
Remove the webcamera/microphone module:
1. Detach the grounding tape (1) that secures the webcamera/microphone module to the
display assembly.
2. Disconnect the webcamera/microphone module cable (2) from the system board.
3. Detach the webcamera/microphone module (3) from the display assembly. (The webcamera/
microphone module is attached to the display assembly with double-sided adhesive.)
4.
Remove the webcamera/microphone module and cable.
Reverse this procedure to install the webcamera/microphone module.
Back cover on page 38).
Tablet battery on page 40).
Removal and replacement procedures
43