Touchscreen Board - HP Split 13 x2 PC Maintenance And Service Manual

3. Remove the volume button board (3).
Reverse this procedure to install the volume button board.

TouchScreen board

Description
TouchScreen board (includes double-sided adhesive)
NOTE: The TouchScreen board does not include the TouchScreen board cable. The TouchScreen
board cable is included in the Cable Kit, spare part number 736883-001. See
on page 23
Before removing the TouchScreen board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the tablet battery (see
52 Chapter 4 Removal and replacement preliminary requirements
for more Cable Kit spare part information.
Back cover on page 38).
Tablet battery on page
Spare part number
736892-001
Cable Kit
40).