HP Split 13 x2 PC Maintenance And Service Manual page 71

d.
WWAN module (see
e.
Volume button board (see
Remove the wireless antenna cables and transceivers:
1. Disconnect the WLAN antenna cables (1) from the WLAN module.
2. Release the wireless antenna cables from the retention clips (2) and routing channel built into the
display assembly.
3. Detach the wireless antenna transceivers (3) from the display assembly. (The wireless antenna
transceivers are attached to the display assembly with double-sided adhesive.)
Reverse this procedure to install the wireless antenna cables and transceivers.
WWAN module on page
Volume button board on page
47)
51)
Removal and replacement procedures
63