Installation Of Ceiling Fan Blades - Emerson ASHLAND CF717BS00 Owner's Manual

BP7483 ASHLAND CF717 12/19/13
10.1
Remove and discard the five motor hub spacers to free the
motor for installation of ceiling fan blades (Figure 20).
10.2
Mount the blade flanges to the fan blades using three
#8-32 x 8mm washer head blade screws (supplied) per
blade (Figure 21).
Repeat this procedure for remaining four fan blades and
blade flanges.
!
To reduce the risk of personal injury, do not bend the
blade flanges when installing the flanges, balancing
the blades, or cleaning the fan. Do not insert foreign
objects between rotating fan blades.
10.3
Rotate the motor hub to expose the motor flange holes
through the switch cup plate.
Attach a blade/flange assembly to the motor hub using
two 1/4-20 x 1/2" oval head screws (supplied)
(Figure 22). Do not tighten completely at this time.
Install remaining blade assemblies in the same way.
Gently snug all flange screws to the motor hub, working
around the hub in a clockwise sequence.
NOTE: Take care not to scratch fan housing
assembly when installing blades.
9:59 AM Page 14

10. Installation of Ceiling Fan Blades

WARNING
Figure 20
Figure 21
1/4-20 x 1/2" OVAL HEAD
SCREWS (2 per blade /
flange assembly)
Figure 22
14
MOTOR HUB
MOTOR HUB
SPACERS (5)
#8-32 x 8mm WASHER
HEAD BLADE SCREW
(3 per blade)
FAN BLADE (5)
BLADE FLANGE (5)
BLADE / FLANGE
ASSEMBY (5)
SWITCH CUP
PLATE
ETL Model No.: CF717