Installation Of The Fan Blades - Emerson AIRA ECO CF985BS00 Owner's Manual

7.1
Remove the shipping spacers and the spacer attachment
screws from the motor before installation of blade
assemblies (Figure 20).
Discard the spacers and spacer screws.
7.2
WARNING
!
To reduce the risk of personal injury, do not bend the
blade flanges when installing the flanges, balancing the
blades, or cleaning the fan. Do not insert foreign objects
between rotating fan blades.
Position a ceiling fan blade (with the curved portion of the
blade facing down) onto a blade flange (Figure 21).
Place a blade flange plate onto the the ceiling fan blade,
aligning the five holes (Figure 21).
Securely fasten the blade flange, ceiling fan blade and the
blade flange plate using five #8-32 x 8mm washer head
blade screws per blade (Figure 21).
Repeat for remaining seven blade/flange/plate
assemblies.
7.3
Attach the flange/blade assembly to the motor hub using
two 1/4-20 x 1/2" oval head screws (supplied)
(Figure 22).
Attach the flange/blade assemblies clockwise making sure
that the interconnecting lip of the flanges mate with the
next flange attachment (Figure 22).
Repeat this procedure for the other seven flange/blade
assemblies.
Make sure all the screws are tightened securely.

7. Installation of the Fan Blades

SHIPPING SPACER (4)
Figure 20
SHIPPING SPACER SCREW (4)
CURVED PORTION
OF FAN BLADE
FACING
DOWNWARD
Figure 21
FLANGE NTERCONNECT NG L
MOTOR HUB
1/4-20 x 1/2" OVAL HEAD SCREW
(2 per blade/flange assembly)
Figure 22
13
MOTOR
ASSEMBLY
#8-32 x 8mm WASHER
HEAD BLADE SCREW (5)
BLADE FLANGE PLATE
CEILING FAN BLADE
BLADE FLANGE
FLANGE/BLADE
ASSEMBLY
emersonfans.com
Please contact 1-800-654-3545 for further assistance
E.T.L. Model No.: CF985