Ceiling Fan Assembly - Emerson CARRERA CF784BS01 Owner's Manual

3.1
Rotate the motor hub to align the hub notch area over
each of the five screws which is holding the shipping
retainer to the motor assembly.
One by one unscrew each screw and discard screws and
shipping retainer (Figure 1).
3.2
Verify that the flange gaskets are preinstalled onto the end
of each of the blade flanges (Figure 2).
A spare flange gasket is supplied in the loose parts bag if
required.
3.3
Mount blade flanges to fan blades using four #10-24 x
10mm washer head blade screws (Figure 3).

3. Ceiling Fan Assembly

5
MOTOR HUB
REMOVE SHIPPING
RETAINER
BY REMOVING
5 SCREWS
Figure 1
Figure 2
BLADE
FLANGE
Figure 3
Please contact 1-800-654-3545 for further assistance
BLADE
FLANGE
FLANGE
GASKET
#10-24 x 10mm WASHER
HEAD BLADE SCREW
(4 per blade/flange)
FAN BLADE
emersonfans.com
U.L. Model No.: CF784-1