Related Manuals for Emerson CF712AB02
Summary of Contents for Emerson CF712AB02
- Page 1 READ AND SAVE THESE INSTRUCTIONS Model No. CF712AB02 CF712ORB02 CF712AW02 CF712WW02 CF712BS02 19.0 Net Weight: Lbs. PRO Series Ceiling Fan Owner's Manual Part No. F40BP73000005 Form No. BP7300-5 ETL Model No.: CF712...
-
Page 2: Safety Instructions
Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. WARNING: To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balancing the blades or cleaning the fan. -
Page 3: Unpacking Instructions
This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Company. Substitution of parts or accessories not designated for use with this product by Emerson Electric Company could result in personal injury or property damage. -
Page 4: Removal Of The Hanger Bracket
Installing The Hanger IMPORTANT Ball/Downrod Assembly Your ceiling fan is designed to be installed either in the standard manner, or in the (For Standard Mounting) close-to-the-ceiling manner. Using the standard method, the hanger ball/downrod assembly will suspend the fan several inches 1. -
Page 5: Installing The Ceiling Cover On The Fan Motor Housing
Installing The Ceiling Cover WARNING On The Fan Motor Housing The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. (For Close-to-the-Ceiling Mounting) outlet box listed as “Acceptable for Fan Support”. 1. -
Page 6: Electrical Requirements
Electrical Requirements Hanging The Ceiling Fan (Standard Method Using Your new ceiling fan will require a grounded electrical Hanger Ball/Downrod) supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and 1. Carefully lift the fan assembly and seat the hanger capable of withstanding a load of at least 50 pounds. -
Page 7: Installing The Fan Blades
2. Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector REINSTALL SCREW AND TIGHTEN SCREW LOCKWASHER supplied (Figure 10). Securely connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied (Figure 10). -
Page 8: Installing The Light Fitter
2. Mount one blade assembly to the motor hub by 5. Attach the switch housing cover with light fitter to mating the alignment post (Figure 12) of the flange the switch housing using the three previously with one of the alignment slots in the motor hub removed screws. -
Page 9: Using Your Ceiling Fan
Using Your Ceiling Fan WARNING To avoid possible fire hazard, do not exceed wattage 1. Restore electrical power to the outlet box by turning indicated on the fitter. the electricity on at the main fuse box. 2. Check the operation of the light by gently pulling on the light switch pull chain. -
Page 10: Maintenance
Do not use water when cleaning your ceiling fan. It designated specifically for use with this product by could damage the motor or the blades and create the Emerson Electric Company. Substitution of parts or possibility of an electrical shock. accessories not designated for use with this product by Emerson Electric Company could result in personal injury or property damage. -
Page 11: Limited Warranty
You will be responsible for all insurance, freight or other transportation charges to our factory or authorized service center. Your Emerson Air Comfort Ceiling Fan should be properly packed to avoid damage in transit since we will not be responsible for any such damage. -
Page 12: How To Order Repair Parts
• PART DESCRIPTION • NAME OF ITEM • MODEL NUMBER For repair parts, phone 1-800-654-3545. Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 Form No. BP7300-5 Part No. F40BP73000005 Printed in China 06/10...